BS100A rail joint bar

Product Introduction of the BS100A rail joint bar

BS100A rail joint bar is also called BS100A fishplate. It is the connecting parts of two rails in a rail system.

BS100A rail is a rail produced by the British standard for BS11-1985. Most Commonwealth countries and European countries use this rail, so it is widely used. BS100A rail joint bars for rail connection are in great demand. GloryRail develops molds according to customer needs, Can produce BS100A rail joint bar in bulk.

Standards for assembly and maintenance of rail joints:
1: Check whether the bolts are installed and tightened to ensure that there are no scratches or cracks on the surface
2: Check that there are no cracks on the surface of the fishplate. The board has no pinholes with abrasion, corrosion, or wear less than 1mm.
3: When the bolt cannot be put on, use a hammer to hit both ends of the fishplate, align the eyes, and do not use a hammer to drive the screw in.
4: The contact part and bolts of the fish plate and the rail should be oiled; when the fishplate bolts are worn, the positions of the bolt caps must be staggered inside and outside.
5: The order of bolting, using a four-hole fishplate, first tighten the middle two, then tighten the two sides, and then tighten the middle again
6: When screwing the bolts, one person should use a 55cm screw wrench as the standard, and can’t use a too-long screw wrench or two people to screw it.

After more than 20 years of unremitting efforts, the fish plate has become our company’s leading product in the domestic and foreign markets. The varieties include various types of ordinary fishplate, insulated fishplate, drum fishplate, special-shaped fish plates, and cemented insulation. Fishplate. Our company can provide high-quality fishplate R&D and production services according to the following domestic and international standards